Link To Ralspeed Home PageLink To Ralspeed Profile PageLink To Ralspeed Products PageLink To Ralspeed Applications PageLink To Ralspeed Questions & Answers PageLink To Ralspeed Case Studies PageLink To Ralspeed Latest News PageLink To Ralspeed Keypad Demonstration PageLink To Ralspeed Downloads PageLink To Ralspeed Enquiries Page
Ralspeed Motor Control System

Questions & Answers

Q2 THE SOFT STARTER DOES NOT RUN

Down Arrow Start
    
Are terminals selected in the options?

No
Right Arrow

 The user must select terminals in the options menu in order that stop/start signals generated external to the soft starter can operate the unit.
Down Arrow Yes
   
Has the local/remote been set in the inputs menu?

Yes
Right Arrow

 As explained in section 7.5 of the manual there are various programmable inputs so that the user can configure his control system. If, for example, program 1 has been set for local/remote and the input is set high it will have moved the control function from the terminals (remote) to the keypad (local). Therefore, the user will have to remove this input before the terminals will be active
Down Arrow No
   
Has the stop/start controls been connected correctly?

No
Right Arrow

 The stop/start control is either through push buttons, relay or switch contact. If buttons are used the START button must be connected to terminals 1 & 2. The STOP button must be connected to terminals 1 & 3. If a relay or switch contact is used the user must link 1 & 2 and switch between 1 & 3 to give start and stop functions.
Down ArrowYes
    
CONTACT YOUR SUPPLIER

Top of page
PHONE : 01254 582345 Site designed by eBusiness UK